Discount up to 35% for first purchase only this month.

Hippo L-Type RGB Corner Connector

The Hippo L-Type RGB Corner Connector eliminates the extra wire for a secure 90-degree turn.

7.50 $

Hippo L-Type RGB Corner Connector

Category

Description

Need to make a secure 90-degree turn with your RGB flex strip? The Hippo L-Type RGB Corner Connector eliminates the extra wire for a secure 90-degree turn.

 

Easy to install without soldering. First, peel a little bit of the sticker paper off of the strip. Push the strip into the groove and place it on the four metal pins. Make sure that the four pins line up with the copper contacts on the flex strip. Once all the pins are aligned, clamp the plastic tab down. Repeat the same steps for the other end. Check that the polarity is consistent and you’re done! The Hippo Connectors create secure connections by piercing through the flex strip’s copper contacts.

 

Type: L-Type 90-degree Corner Connector – strip to strip
Strip Width: 10mm
Strip Type: 4-pin, 4-conductor, RGB
Max. Voltage: 24V DC
Max. Current: 5A
Size: 26.9 x 14.6 x 7.7mm
Material: Polycarbonate, Copper, and PVC
Wire: no wire

Reviews

There are no reviews yet.

Be the first to review “Hippo L-Type RGB Corner Connector”

Your email address will not be published. Required fields are marked *